Scope of supply

Seamless, drawn copper tube, produced in accordance with EN 12735-1, R220 annealed physical status, phosphorised Cu DHP (Cu + Ag : 99.90% min. – P: 0.015÷0.040%) according to EN 1412, cleaning treatment of the internal surface of the tube in line with with EN 12735-1 e ASTM B280 with soluble residue of less than 0.38 mg/dm², shiny aspect of internal surface, indelible labelling every 60 cm with punching of the external surface of the copper tube, covered at the production stage with a PE-LD closed cell expansion insulation, white RAL 9010, colour, heat conductivity λ ≤ 0,038 W/mk, protected by PE film in white RAL 9010 colour, average value of the water vapour diffusion resistance factor “μ” above 15000, ink labelling on the external surface of the insulation with progressive indication of the measurement in metres with SMISOL® Clim label, Resistance to fire is class B_L-s1-d0, capped at the ends.

Seamless, drawn copper tube, produced in accordance with EN 12735-1, R220 annealed physical status, phosphorised Cu DHP (Cu + Ag : 99.90% min. – P: 0.015÷0.040%) according to EN 1412, cleaning treatment of the internal surface of the tube in line with with EN 12735-1 and ASTM B280 with internal residue of less than 0.38 mg/dm², shiny aspect of internal surface, indelible labelling every 60 cm with punching of the external surface of the copper tube, covered at the production stage with a PE-LD closed cell expansion insulation, grey RAL 7040 colour, average value of the water vapour diffusion resistance factor “μ” above 15000, ink labelling on the external surface of the insulation with progressive indication of the measurement in metres with SMISOL® Frio label, resistance to fire is class B_L-s1-d0 compliant pursuant to EN 13501-1, capped at the ends.

Seamless, drawn copper tube, produced in accordance with EN 12735-1 and EN 13348, R220 annealed physical status, phosphorised Cu DHP (Cu + Ag : 99.90% min. – P: 0.015÷0.040%) according to EN 1412, cleaning treatment of the internal surface of the tube in line with with EN 12735-1 and ASTM B280 with soluble residue of less than 0.38 mg/dm² and a lubricating residue lower than 0.02 mg/dm² in line with EN 13348, shiny aspect of internal surface, indelible labelling every 60 cm with punching of the external surface of the copper tube, capped at the ends. The copper tubes are packed in cardboard boxes and come complete with a documentation that gaurantees it can be traced. Each box can be identified with specific adhesive labels placed on each extremity, displaying the identification number of the box; this number is also shown on an adhesive label placed on each tube.

Seamless, drawn copper tube, produced in accordance with EN 12735-1 and EN 13348, R290 annealed physical status, phosphorised Cu DHP (Cu + Ag : 99.90% min. – P: 0.015÷0.040%) according to EN 1412, cleaning treatment of the internal surface of the tube in line with with EN 12735-1 and ASTM B280 with soluble residue of less than 0.38 mg/dm² and a lubricating residue lower than 0.02 mg/dm² in line with EN 13348, shiny aspect of internal surface, indelible labelling every 60 cm with punching of the external surface of the copper tube, capped at the ends. The copper tubes are packed in cardboard boxes and come complete with a documentation that gaurantees it can be traced. Each box can be identified with specific adhesive labels placed on each extremity, displaying the identification number of the box; this number is also shown on an adhesive label placed on each tube.

Seamless, drawn copper tube, produced in compliance with EN 12735-1 R220 hard temper, phosphorised Cu DHP (Cu + Ag : 99.90% min. – P: 0.015÷0.040%) according to EN 1412
Cleaning process of the internal surface in line with with EN 12735-1 and ASTM B280 with less than 0.38 mg/dm2 of soluble residue
Shiny appearance of the internal surface
Indelible labelling on every 60 cm with the punching of the external surface of the copper tube
Sealed at the ends.

Seamless drawn copper tube, produced in accordance with EN 1057, R220 annealed physical status, phosphorised Cu DHP (Cu + Ag : 99.90% min. – P: 0.015÷0.040%) according to EN 1412, treatment of pre-passivation on the internal surface of the tube with a carbon residue of less than 0.06 mg/dm², indelible labelling every 60 cm with punching of the external surface of the copper tube, CE labelled in compliance with EU Regulation 305/2011 for construction products (CPR). The tubing, used for the transportation of domestic gas, must correspond with the dimensional characteristis imposed by the UNI 7129.

Seamless, drawn copper tube, produced in accordance with EN 1057, R290 crude physical status, phosphorised Cu DHP (Cu + Ag : 99,90% min. – P: 0.015÷0.040%) according to EN 1412, treatment of pre-passivation on the internal surface of the tube, indelible labelling every 60 cm with punching of the external surface of the copper tube, CE labelled in compliance with EU Regulation 305/2011 for construction products (CPR). The tubing, used for the transportation of domestic gas, must correspond with the dimensional characteristis imposed by the UNI 7129.

Seamless, drawn copper tube, produced in accordance with EN 1057, R220 annealed physical status, phosphorised Cu DHP (Cu + Ag : 99.90% min. – P: 0.015÷0.040%) according to EN 1412, treatment of pre-passivation on the internal surface of the tube with a carbon residue of less than 0.06 mg/dm², indelible labelling every 60 cm with punching of the external surface of the copper tube, CE labelled in compliance with EU Regulation 305/2011 for construction products (CPR) specific for the production of underfloor heating panel systems in accordance with standard EN 1264, dimensions 14 x 0.8mm.

Seamless, drawn copper tube, produced in accordance with EN 1057, R220 annealed physical status, phosphorised Cu DHP (Cu + Ag : 99.90% min. – P: 0.015÷0.040%) according to EN 1412, treatment of pre-passivation on the internal surface of the tube with a carbon residue of less than 0.06 mg/dm², indelible labelling every 60 cm with punching of the external surface of the copper tube, produced in compliance with the measures set out in UNI 7129, covered at the production stage with a PVC insulation with star shaped section, yellow RAL 1003 colour, covering thickness of 1.5mm complying with UNI 10823 standard with insulation electric resistance equal to or greater than 100 MWm², specific for the transportation of gas for domestic use in underground areas as foreseen by UNI 7129, ink labelling on the external surface of the insulation with progressive indication of the measurement in metres with SMISOL® Gas label.

Seamless, drawn copper tube, produced in accordance with EN 1057, R220 annealed physical status, phosphorised Cu DHP (Cu + Ag : 99.90% min. – P: 0.015÷0.040%) according to EN 1412, treatment of pre-passivation on the internal surface of the tube with a carbon residue of less than 0.06 mg/dm², indelible labelling every 60 cm with punching of the external surface of the copper tube, produced in line with the measures foreseen by UNI 7129, covered at the production stage with a star shaped PE-LD insulation with air chamber and reinforcements/spacers with helical propensity, Pantone yellow 102-C, Reaction to fire classification B_Ls1d0 (EN 13501-1), specific for the transportation of gas for domestic use as foreseen under UNI 7129, ink labelling on the external surface of the insulation with progressive indication of the measurement in metres with SMISOL® Tekgas label.

Seamless, drawn copper tube, produced in accordance with EN 1057, R220 annealed physical status, phosphorised Cu DHP (Cu + Ag : 99.90% min. – P: 0.015÷0.040%) according to EN 1412, treatment of pre-passivation on the internal surface of the tube with a carbon residue of less than 0.06 mg/dm², indelible labelling every 60 cm with punching of the external surface of the copper tube, covered at the production stage with a PVC insulation with star shaped section, grey RAL 7035 colour, covering thickness of 1.5mm, ink labelling on the external surface of the insulation with progressive indication of the measurement in metres with SMISOL® Più label.

Seamless, drawn copper tube, produced in accordance with EN 1057, R220 annealed physical status, phosphorised Cu DHP (Cu + Ag : 99.90% min. – P: 0.015÷0.040%) according to EN 1412, treatment of pre-passivation on the internal surface of the tube with a carbon residue of less than 0.06 mg/dm², indelible labelling every 60 cm with punching of the external surface of the copper tube, covered at the production stage with a PE-LD closed cell expansion insulation, green RAL 6029 colour, thermal conductivity λ ≤ 0,038 W/mk, ink labelling on the external surface of the insulation with progressive indication of the measurement in metres with SMISOL® One label, resistance to fire is class B_L-s1-d0 compliant pursuant to EN 13501-1.

Seamless, drawn copper tube, produced in accordance with UNI 11342, R220 annealed physical status, phosphorised Cu DHP (Cu + Ag : 99.90% min. – P: 0.015÷0.040%) according to EN 1412, treatment of pre-passivation on the internal surface of the tube with a carbon residue of less than 0.06 mg/dm², permanently covered at the production stage with PE-RT white RAL 9010 colour, pre-insulated at the production stage with closed cell expansion insulation in PE-LD grey RAL 7035 colour, protected by PE film in grey RAL 7035 colour, heat conductivity λ ≤ 0,040 W/mk, resistance to the diffusion of water level µ > 9,000,  indeliblelabelling on the external surface of the insulation with progressive indication of the measurement in metres, with Strato label and indications of the reference standard, Cat. 1 fire resistant (Ministerial Decree 26/06/84).